STD730-E1HS1AS-1-F-AHS-11S-A-00A0-F5,F1-0000 | Honeywell STD700 | HoneyWell Pressure Transmitter
STD730-E1HS1AS-1-F-AHS-11S-A-00A0-F5,F1-0000 | Honeywell STD700 | HoneyWell Pressure Transmitter
Back to products
STD735-E1HS4AS-1-A-EHS-11S-A-11A0 | Honeywell STD735 | HoneyWell Pressure Transmitter
STD735-E1HS4AS-1-A-EHS-11S-A-11A0 | Honeywell STD735 | HoneyWell Pressure Transmitter
Click to enlarge

STD735-E1AS4AS-1- C-DHT-13S-B-30A0-FG,FX,FE,TP-0000 | Honeywell STD735 | HoneyWell Pressure Transmitter

Part Number: STD735-E1AS4AS-1- C-DHT-13S-B-30A0-FG,FX,FE,TP-0000

  • Free Selection Free Online Product Selection Service

To pick up today

  • Fast Shipping & Competitive pricing

Our courier will deliver to the specified address

  • warranty Min. order: 1 piece & 2-Year Warranty

DHL courier will deliver to the specified address

Payment Methods:

Description

Part Number: STD735-E1AS4AS-1- C-DHT-13S-B-30A0-FG,FX,FE,TP-0000

Model: STD735 SmartLine Differential Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Features
  • Accuracies up to 0.05% of span
  • Stability up to 0.020% of URL per year for 10 years
  • Automatic static pressure & temperature compensation
  • Rangeability up to 100:1
  • Response times as fast as 100ms
  • Easy to use and intuitive display capabilities
  • Intuitive External Zero, Span and configuration capability
  • Comprehensive on-board diagnostic capabilities
  • Integral Dual Seal design for highest safety based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0
  • World class overpressure protection
  • Full compliance to SIL 2/3 requirements.
  • Modular design characteristics

Ordering Information

Model STD735 Differential Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material: 316 Stainless Steel
Diaphragm Material: 316L Stainless Steel
Fill Fluid 1 Silicone Oil 200
Process Connection A None
None (1/4′ NPTF female thread Std)
Bolt/Nuts Materials S 316 SS
Vent/Drain Type/Location 4 Head Type: Dual Ended
Vent Type: Standard Vent
Location: End
Vent Material: Matches Head Material(1)
Gasket Materials A Teflon® or PTFE (Glass Filled)
Static Pressure S Standard Static Pressure – 4500 psig (315 bar)
Head/Connect Orientation 1 Standard, High Side Left, Low Side Right(2) / Std Head Orientation
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type D Material: Polyester Powder Coated Aluminum
Connection: M20
Lighting Protection: Yes
Output/Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections T Indicator: Standard (w/Internal
Zero,Span & Config Buttons)
Ext Zero, Span & Config Buttons: Yes
Languages: EN, RU
Application Software 1 Diagnostics: Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 3 Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 – 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 3 Bracket Type: Angle Bracket
Material: 316 SS
Customer Tag 0 No customer tag
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications &
Warranty		 FG
FX
FE
TP		 NACE MR0175; MR0103; ISO15156 Process wetted parts only
Marine (DNV,ABS,BV,KR,LR)
FMEDA (SIL 2/3) Certification
Over-Pressure Leak Test Certificate (1.5X MAWP)
Factory 0000 Factory Identification
  1. Except Carbon Steel Heads shall use 316SS Vent/Drain, Plugs & Adapters when required
  2. Left side/Right side as viewed from the customer connection perspective
  3. NAMUR Output Limits 3.8 – 20.5mAdc can be configured by the customer or select custom configuration Table Vc
NOTE: This item is a replacement of STD735-E1AS4AS-1- C-DHT-13S-B-3QA0-FG,FX,Ft,FE,TP-0000
  • Estimated Lead Time: 12 – 18 Weeks
  • Shipping Weight: 8 Kg

Customer Reviews