Model |
STD820 |
Differential Pressure Transmitter |
Process Wetted Heads & Diaphragm Materials |
E |
Process Head Material: 316 Stainless Steel
Diaphragm Material: 316L Stainless Steel |
Fill Fluid |
1 |
Silicone Oil 200 |
Process Connection |
A |
None
None (1/4′ NPTF female thread Std) |
Bolt/Nuts Materials |
S |
316 SS |
Vent/Drain Type/Location |
4 |
Head Type: Dual Ended
Vent Type: Standard Vent
Location: End
Vent Material: Matches Head Material(1) |
Gasket Materials |
A |
Teflon® or PTFE (Glass Filled) |
Static Pressure |
S |
Standard Static Pressure – 4500 psig (315 bar) |
Head/Connect Orientation |
1 |
Standard
High Side Left, Low Side Right(2) / Std Head Orientation |
Approvals |
C |
ATEX Explosion proof, Intrinsically Safe & Non-incendive |
Electronic Housing Material & Connection Type |
C |
Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: Yes |
Output/Protocol |
H |
Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
Customer Interface Selections |
E |
Indicator: Advanced
Ext Zero, Span & Config Buttons: Yes
Languages: EN, GR, FR, IT,SP, RU, TU |
Application Software |
1 |
Diagnostics: Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings |
1 |
Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 – 20.8 mAdc) |
General Configuration |
C |
Custom Configuration (Unit Data Required from customer) |
Accuracy and Calibration |
B |
Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration |
Mounting Bracket |
2 |
Bracket Type: Angle Bracket
Material: 304 SS |
Customer Tag |
1 |
One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
Unassembled Conduit Plugs & Adapters |
A6 |
1/2 NPT 316 SS Certified Conduit Plug |
Certifications &
Warranty |
F1 |
Calibration Test Report & Certificate of Conformance (F3399) |
Factory |
0000 |
Factory Identification |