Model |
STR84G |
SmartLine Pressure Transmitter with Remote Diaphragm Seals |
Number of Seals |
1 |
1 Remote Seal (High Side) |
Primary Fill Fluid (Meter body) |
1 |
Silicone Oil 200 |
In-Line Gauge/
Absolute |
A |
316 SS Bonnet |
Bolts and Nuts for Transmitter Heads |
0 |
None |
Secondary Fill Fluid (capillary & seal)** |
1 |
Silicone Oil 200 |
Connection of Remote Seal to Meter Body** |
B |
Capillary Length: 10 feet (3.0 m), SS Armor |
Seal Option** |
0 |
None |
Flush Flanged Seal with Lower** |
AFC |
Diaphragm Diameter: 3.5′
Flange Size: 3′
Flange Pressure Rating(1): ANSI 300 |
Wetted Material |
AA |
Diaphragm: 316L SS
Upper Insert: 316L SS |
Non-Wetted Material (upper, upper insert) |
2 |
316L SS |
Seal-Capillary Connection |
1 |
Center Seal |
Calibration Rings |
B |
316L SS |
Flushing Connection and Plugs(2) |
S |
Two 1/2′ with metal plugs |
Approvals |
C |
ATEX Explosion proof, Intrinsically Safe & Non-incendive |
Electronic Housing Material & Connection Type |
B |
Material: Polyester Powder Coated Aluminum
Connection: M20
Lightning Protection: None |
Output/ Protocol |
F |
Analog Output: none
Digital Protocol: Foundation Fieldbus |
Customer Interface Selections |
B |
Indicator: Basic
Buttons: None
Languages: English |
Application Software |
1 |
Standard Diagnostics |
Output Limit, Failsafe & Write Protect Settings |
5 |
Write Protect: Enabled
Fail Mode: N/A
High & Low Output Limits(3): N/A Fieldbus or Profibus |
General Configuration |
S |
Factory Standard |
Accuracy and Calibration |
A |
Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration |
Mounting Bracket |
1 |
Bracket Type: Angle Bracket
Material: Carbon Steel |
Customer Tag |
1 |
One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
Unassembled Conduit Plugs & Adapters |
A0 |
No Conduit Plugs or Adapters Required |
Certifications & Warranty |
F1
F5
|
Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195) |
Factory |
0000 |
Factory Identification |